Ambulance Service Vehicular Charging Solutions
Ludo McGurk are manufacturers and suppliers of power supply and management products, purpose designed for installation to Ambulance Service vehicles.
Our industrial grade products include the Auto Eject, Data Logging LudoCharger Battery Charger, Auto Safe mains safety switch, split charge systems and a wide range of Vehicle Power Management Systems.
Kussmaul Auto Ejects
Super 16 Auto Eject uses the standard European IEC60309-2 connector, as specified for connection to vehicles in the wiring regs
Super 15, 15A Automatic Power Line Disconnect For Mains Shore Lines
Super 30, 32A Deluxe Automatic Power Line Disconnect For Mains Shore Lines
Auto-Eject Spares & Accessories
Range of connectors to suit Kussmaul Auto Eject range
Range of replacement covers to suit Super 15, Super 16 & Super 30 Auto Ejects in both 110V & 230V
Auto Eject range; a non-PTFE and non-Silicone based product ensures long lasting lubrication with no loss of electrical connectivity.
Supplies a momentary pulse signal. Ideal solution where an eject signal for the Auto Eject is not possible from the starter solenoid
Our in-house repair program supports fleet cost saving and recycling, with a repair being up to 75% less than when compared to a new unit
LudoChargers
30A Data logging battery charger for a single battery system
30A LudoCharger 2 is simple to install and use and has two completely separately controlled outputs.
40A Data Logging battery charger for a single battery system
50A High power data logging battery charger for a single battery system
50A LudoCharger 2 Plus is simple to install and use and has two completely separately controlled outputs.
The LudoCharger 24/12 has one 24V output and one 12V output, ideal for 24V Fire Appliance applications, where there is a 12V LPP fitted.
Voltage Indicators and Accessories
The Ludo McGurk SVE Voltage and charge indicator has a 2.4 inch, colour TFT display, allowing vehicle operators to clearly see their battery voltage(s
Wall Mount Battery Charger
Data logging battery charger for a single battery system
Intelligent Split Charge
Intelligent Split Charge. Easy to fit 3 wire install. Voltage Sensing with adjustable voltage settings.
Advanced Split Charge Relay system with Over Voltage protection and features Automatic Emergency Start removing the need for manual parallel switch
Advanced 3 bank Split Charge System, with Over Voltage protection and features Automatic Emergency Start removing the need for manual parallel switch
Charge Combiner 3 was designed for marine applications that have a requirement for 2 inputs and a shared House battery bank
Automatic Battery Isolator
British designed and manufactured Automatic Battery Isolator, to prevent equipment from over discharging the battery
Load Shedders
Automatically detects low battery voltage and sheds load. Adjustable dropout/pull-in voltages
Automatically detects low battery voltage and sheds load. Adjustable dropout/pull-in voltages and time delays
Unit functions as the Automatic Load Shedder with Adjustable Time Delay but enters a timeout period when the engine is switched off
Specifically designed for the BMW RESPoNSe-1.0 equipped vehicles, where the installation of a Power Management System is recommended by BMW.
Time Delay Relays
Time Delay On, Time Delay Off, Or Both
Under-Voltage Detectors
This advanced digital Under-Voltage Detector activates when the vehicle battery voltage drops below 12V (or 24V)
Under-Voltage Detector 2 allows two different battery banks to be managed, at different voltages if required.
Automatically sends out an SMS-Text message to mobile phones when battery voltage falls to default voltage.
Charge and Protect
Intelligent Split Charge combined with Automatic Auxiliary Battery Protector. Includes Automatic Jump Start and Over-Voltage Protection features.
Tail Lift Battery Isolator
Prevents Tail Lift use from over discharging the vehicle battery.
Software for CANpower
Download this free software and control all CANpower devices and your LudoCharger from your latop
General Battery Management and Switching
Allows engine to run with the ignition key removed. Engine stops and cannot be restarted without key if attempt is made to drive away.
Supplies a momentary pulse signal. Ideal solution where an eject signal for the Auto Eject is not possible from the starter solenoid
For Vehicles With An On-Board Generator
For Vehicles With An On-Board Generator and Inverter
Ideal solution to running 12V equipment such as Comms, or LPP from a 24V source.
Accessories
Dual USB Charger, 5V 2.1A. Ideal for charging smart devices.
